Trojan.Packed.Libix.Gen.9_801cb7585c – Adaware

Dynamic Analysis

Payload

No specific payload has been found.

Process activity

The Trojan creates the following process(es):

%original file name%.exe:388
regsvr32.exe:1540

The Trojan injects its code into the following process(es):

scvhost.exe:1768

Mutexes

The following mutexes were created/opened:No objects were found.

File activity

The process %original file name%.exe:388 makes changes in the file system.

The Trojan creates and/or writes to the following file(s):

%WinDir%\mswinsck.ocx (108 bytes)
%WinDir%\scvhost.exe (6675 bytes)
%System%\drivers\etc\hosts (254 bytes)

The Trojan deletes the following file(s):

%System%\drivers\etc\hosts (0 bytes)

Registry activity

The process %original file name%.exe:388 makes changes in the system registry.

The Trojan creates and/or sets the following values in system registry:

[HKCU\Software\Microsoft\Windows NT\CurrentVersion\Windows]
"run" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Active Setup\Installed Components\{A04A5380-D1B6-D40D-FEF7-B1C80050698F}]
"StubPath" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Cryptography\RNG]
"Seed" = "23 FE 66 30 BA 40 24 D8 27 2C AC E4 62 78 F6 97"

[HKCU\Software\VB and VBA Program Settings\win\options]
"sin" = ""

To automatically run itself each time Windows is booted, the Trojan adds the following link to its file to the system registry autorun key:

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnceEx]
"MSConfig" = "%WinDir%\scvhost.exe"

"(Default)" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnce]
"Windows Update" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]
"Windows Update" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Runservices]
"icq lite" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnce]
"update checker" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnceEx]
"Windows Update" = "%WinDir%\scvhost.exe"

"update checker" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnce]
"(Default)" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Runservices]
"MSConfig" = "%WinDir%\scvhost.exe"

The Trojan adds the reference to itself to be executed when a user logs on:

[HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
"Shell" = "Explorer.exe scvhost.exe"

To automatically run itself each time Windows is booted, the Trojan adds the following link to its file to the system registry autorun key:

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnceEx]
"icq lite" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Runservices]
"update checker" = "%WinDir%\scvhost.exe"

"AntiVir" = "%WinDir%\scvhost.exe"

"(Default)" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]
"update checker" = "%WinDir%\scvhost.exe"

"(Default)" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Runservices]
"Windows Update" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]
"icq lite" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnce]
"MSConfig" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnceEx]
"AntiVir" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]
"AntiVir" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnce]
"icq lite" = "%WinDir%\scvhost.exe"

"AntiVir" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]
"MSConfig" = "%WinDir%\scvhost.exe"

The process regsvr32.exe:1540 makes changes in the system registry.

The Trojan creates and/or sets the following values in system registry:

[HKCR\MSWinsock.Winsock]
"(Default)" = "Microsoft WinSock Control, version 6.0"

[HKCR\CLSID\{248DD896-BB45-11CF-9ABC-0080C7E7B78D}\ToolboxBitmap32]
"(Default)" = "%WinDir%\mswinsck.ocx, 1"

[HKCR\Interface\{248DD893-BB45-11CF-9ABC-0080C7E7B78D}\ProxyStubClsid]
"(Default)" = "{00020420-0000-0000-C000-000000000046}"

[HKCR\CLSID\{248DD897-BB45-11CF-9ABC-0080C7E7B78D}\InprocServer32]
"(Default)" = "%WinDir%\mswinsck.ocx"

[HKCR\Interface\{248DD893-BB45-11CF-9ABC-0080C7E7B78D}\TypeLib]
"Version" = "1.0"

[HKCR\CLSID\{248DD896-BB45-11CF-9ABC-0080C7E7B78D}\MiscStatus\1]
"(Default)" = "132497"

[HKCR\Interface\{248DD892-BB45-11CF-9ABC-0080C7E7B78D}]
"(Default)" = "IMSWinsockControl"

[HKCR\MSWinsock.Winsock\CLSID]
"(Default)" = "{248DD896-BB45-11CF-9ABC-0080C7E7B78D}"

[HKCR\CLSID\{248DD897-BB45-11CF-9ABC-0080C7E7B78D}]
"(Default)" = "Winsock General Property Page Object"

[HKCR\CLSID\{248DD896-BB45-11CF-9ABC-0080C7E7B78D}\InProcServer32]
"(Default)" = "%WinDir%\mswinsck.ocx"

[HKCR\Interface\{248DD893-BB45-11CF-9ABC-0080C7E7B78D}\TypeLib]
"(Default)" = "{248DD890-BB45-11CF-9ABC-0080C7E7B78D}"

[HKCR\TypeLib\{248DD890-BB45-11CF-9ABC-0080C7E7B78D}\1.0\0\win32]
"(Default)" = "%WinDir%\mswinsck.ocx"

[HKCR\Interface\{248DD893-BB45-11CF-9ABC-0080C7E7B78D}]
"(Default)" = "DMSWinsockControlEvents"

[HKCR\Interface\{248DD892-BB45-11CF-9ABC-0080C7E7B78D}\ProxyStubClsid]
"(Default)" = "{00020424-0000-0000-C000-000000000046}"

[HKCR\CLSID\{248DD896-BB45-11CF-9ABC-0080C7E7B78D}\VersionIndependentProgID]
"(Default)" = "MSWinsock.Winsock"

[HKCR\CLSID\{248DD896-BB45-11CF-9ABC-0080C7E7B78D}\InProcServer32]
"ThreadingModel" = "Apartment"

[HKCR\Interface\{248DD892-BB45-11CF-9ABC-0080C7E7B78D}\TypeLib]
"Version" = "1.0"
"(Default)" = "{248DD890-BB45-11CF-9ABC-0080C7E7B78D}"

[HKCR\CLSID\{248DD896-BB45-11CF-9ABC-0080C7E7B78D}\ProgID]
"(Default)" = "MSWinsock.Winsock.1"

[HKCR\CLSID\{248DD896-BB45-11CF-9ABC-0080C7E7B78D}]
"(Default)" = "Microsoft WinSock Control, version 6.0"

[HKCR\TypeLib\{248DD890-BB45-11CF-9ABC-0080C7E7B78D}\1.0]
"(Default)" = "Microsoft Winsock Control 6.0"

[HKCR\CLSID\{248DD896-BB45-11CF-9ABC-0080C7E7B78D}\Version]
"(Default)" = "1.0"

[HKCR\TypeLib\{248DD890-BB45-11CF-9ABC-0080C7E7B78D}\1.0\FLAGS]
"(Default)" = "2"

[HKCR\MSWinsock.Winsock\CurVer]
"(Default)" = "MSWinsock.Winsock.1"

[HKCR\Interface\{248DD893-BB45-11CF-9ABC-0080C7E7B78D}\ProxyStubClsid32]
"(Default)" = "{00020420-0000-0000-C000-000000000046}"

[HKLM\SOFTWARE\Microsoft\Cryptography\RNG]
"Seed" = "76 93 60 46 FA 6D 19 85 FC B4 9A 15 7A B1 EC 68"

[HKCR\CLSID\{248DD896-BB45-11CF-9ABC-0080C7E7B78D}\MiscStatus]
"(Default)" = "0"

[HKCR\MSWinsock.Winsock.1\CLSID]
"(Default)" = "{248DD896-BB45-11CF-9ABC-0080C7E7B78D}"

[HKCR\Interface\{248DD892-BB45-11CF-9ABC-0080C7E7B78D}\ProxyStubClsid32]
"(Default)" = "{00020424-0000-0000-C000-000000000046}"

[HKCR\TypeLib\{248DD890-BB45-11CF-9ABC-0080C7E7B78D}\1.0\HELPDIR]
"(Default)" = ""

[HKCR\CLSID\{248DD896-BB45-11CF-9ABC-0080C7E7B78D}\TypeLib]
"(Default)" = "{248DD890-BB45-11CF-9ABC-0080C7E7B78D}"

[HKCR\MSWinsock.Winsock.1]
"(Default)" = "Microsoft WinSock Control, version 6.0"

The Trojan deletes the following registry key(s):

[HKCR\CLSID\{248DD897-BB45-11CF-9ABC-0080C7E7B78D}]
[HKCR\CLSID\{248DD896-BB45-11CF-9ABC-0080C7E7B78D}]

The Trojan deletes the following value(s) in system registry:

[HKCR\CLSID\{248DD897-BB45-11CF-9ABC-0080C7E7B78D}\InprocServer32]
"ThreadingModel"

The process scvhost.exe:1768 makes changes in the system registry.

The Trojan creates and/or sets the following values in system registry:

[HKCU\Software\Microsoft\Windows NT\CurrentVersion\Windows]
"run" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Active Setup\Installed Components\{A04A5380-D1B6-D40D-FEF7-B1C80050698F}]
"StubPath" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Cryptography\RNG]
"Seed" = "DA 51 0F 4D E6 1C A6 B1 4C 68 FF 76 AF EB 2B FC"

To automatically run itself each time Windows is booted, the Trojan adds the following link to its file to the system registry autorun key:

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnceEx]
"MSConfig" = "%WinDir%\scvhost.exe"

"(Default)" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnce]
"Windows Update" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]
"Windows Update" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Runservices]
"icq lite" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnce]
"update checker" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnceEx]
"Windows Update" = "%WinDir%\scvhost.exe"

"update checker" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnce]
"(Default)" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Runservices]
"MSConfig" = "%WinDir%\scvhost.exe"

The Trojan adds the reference to itself to be executed when a user logs on:

[HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
"Shell" = "Explorer.exe scvhost.exe"

To automatically run itself each time Windows is booted, the Trojan adds the following link to its file to the system registry autorun key:

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnceEx]
"icq lite" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Runservices]
"update checker" = "%WinDir%\scvhost.exe"

"AntiVir" = "%WinDir%\scvhost.exe"

"(Default)" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]
"update checker" = "%WinDir%\scvhost.exe"

"(Default)" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Runservices]
"Windows Update" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]
"icq lite" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnce]
"MSConfig" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnceEx]
"AntiVir" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]
"AntiVir" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnce]
"icq lite" = "%WinDir%\scvhost.exe"

Adds a rule to the firewall Windows which allows any network activity:

[HKLM\System\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy\StandardProfile\AuthorizedApplications\List\%WinDir%]
"scvhost.exe" = "%WinDir%\scvhost.exe:*:Enabled:Microsoft Windows"

To automatically run itself each time Windows is booted, the Trojan adds the following link to its file to the system registry autorun key:

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnce]
"AntiVir" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]
"MSConfig" = "%WinDir%\scvhost.exe"

Dropped PE files

MD5	File path
9484c04258830aa3c2f2a70eb041414c	c:\WINDOWS\mswinsck.ocx

HOSTS file anomalies

The Trojan modifies "%System%\drivers\etc\hosts" file which is used to translate DNS entries to IP addresses. The modified file is 254 bytes in size. The following strings are added to the hosts file listed below:

127.0.0.1	dl1.avgate.net
127.0.0.1	dl2.avgate.net
127.0.0.1	dl3.avgate.net
127.0.0.1	dl4.avgate.net
127.0.0.1	dl5.avgate.net
127.0.0.1	dl6.avgate.net
127.0.0.1	dl7.avgate.net
127.0.0.1	dl8.avgate.net
127.0.0.1	dl9.avgate.net

Rootkit activity

No anomalies have been detected.

Propagation

Removals

Remove it with Ad-Aware

Click (here) to download and install Ad-Aware Free Antivirus.
Update the definition files.
Run a full scan of your computer.

Manual removal*

Terminate malicious process(es) (How to End a Process With the Task Manager):
%original file name%.exe:388
regsvr32.exe:1540
Delete the original Trojan file.
Delete or disinfect the following files created/modified by the Trojan:
%WinDir%\mswinsck.ocx (108 bytes)
%WinDir%\scvhost.exe (6675 bytes)
%System%\drivers\etc\hosts (254 bytes)
Delete the following value(s) in the autorun key (How to Work with System Registry):
[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnceEx]
"MSConfig" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnceEx]
"(Default)" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnce]
"Windows Update" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]
"Windows Update" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Runservices]
"icq lite" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnce]
"update checker" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnceEx]
"Windows Update" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnceEx]
"update checker" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnce]
"(Default)" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Runservices]
"MSConfig" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnceEx]
"icq lite" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Runservices]
"update checker" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Runservices]
"AntiVir" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Runservices]
"(Default)" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]
"update checker" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]
"(Default)" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Runservices]
"Windows Update" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]
"icq lite" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnce]
"MSConfig" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnceEx]
"AntiVir" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]
"AntiVir" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnce]
"icq lite" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\RunOnce]
"AntiVir" = "%WinDir%\scvhost.exe"

[HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]
"MSConfig" = "%WinDir%\scvhost.exe"
Remove the references to the Trojan by modifying the following registry value(s) (How to Work with System Registry):
[HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
"Shell" = "Explorer.exe scvhost.exe"
Restore the original content of the HOSTS file (%System%\drivers\etc\hosts): 127.0.0.1 localhost
Reboot the computer.

*Manual removal may cause unexpected system behaviour and should be performed at your own risk.

Static Analysis

VersionInfo

Company Name: -
Product Name: x
Product Version: 0.06
Legal Copyright:
Legal Trademarks:
Original Filename: stub.dll
Internal Name: stub
File Version: 0.06
File Description:
Comments:
Language: Language Neutral

Company Name: -Product Name: xProduct Version: 0.06Legal Copyright: Legal Trademarks: Original Filename: stub.dllInternal Name: stubFile Version: 0.06File Description: Comments: Language: Language Neutral

PE Sections

Name	Virtual Address	Virtual Size	Raw Size	Entropy	Section MD5
	4096	172032	57344	5.49765	4135ed0320565c05e70263491e715783
.rsrc	176128	2216	4096	1.21803	f109c2ae6315960ad892641373043e81
.idata	180224	4096	4096	0.16857	376c61187330b1f02fde034f542a7ac0
Themida	184320	2449408	1208320	5.38811	99f9aa0771246eb6ec197722d8d8de5c

Dropped from:

Downloaded by:

Similar by SSDeep:

Similar by Lavasoft Polymorphic Checker:

Network Activity

URLs

IDS verdicts (Suricata alerts: Emerging Threats ET ruleset)

Traffic

Map

The Trojan connects to the servers at the folowing location(s):

Strings from Dumps

scvhost.exe_1768_rwx_00401000_0000E000:

mswinsck.ocx

MSWinsockLib.Winsock

uMsg

urlmon.dll

winmm.dll

URLDownloadToFileA

kernel32.dll

CreatePipe

EnumWindows

GetWindowsDirectoryA

user32.dll

SHLWAPI.DLL

Shell32.dll

ShellExecuteA

GDI32.DLL

GetAsyncKeyState

GetKeyState

avicap32.dll

%WinDir%\mswinsck.oca

C:\Programme\Microsoft Visual Studio\VB98\VB6.OLB

Keylog

tmrKeyLogger

WriteKeylog

lpKeyName

VBA6.DLL

%System%\msvbvm60.dll\3

ws2_32.dll

AddMsg

WSOCK32.DLL

advapi32.dll

cmdsend

ExitWindowsEx

RegOpenKeyExA

ExitWindows

RegCloseKey

RegCreateKeyExA

RegDeleteKeyA

EnumRegistryKeys

RegEnumKeyExA

HKey

KeyRoot

Subkey

KeyExists

CreateKey

DeleteKey

FC:\Programme\Microsoft Visual Studio\VB98\VBA6.dll

ijl11.dll

GetProcessHeap

iphlpapi.dll

AllocateAndGetTcpExTableFromStack

AllocateAndGetUdpExTableFromStack

SetTcpEntry

GetTcpTable

psapi.dll

olepro32.dll

gdiplus.dll

GdiplusShutdown

msvbvm50.dll

F%System%\stdole2.tlb

2c49f800-c2dd-11cf-9ad6-0080c7e7b78d

*\AC:\DOKUME~1\ha\Desktop\tr\server\server.vbp

NICK

GET / HTTP/1.0

wscript.shell

HKEY_LOCAL_MACHINE\SOFTWARE\MICROSOFT\WINDOWS\CURRENTVERSION\

windows

\win.ini

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Active Setup\Installed Components\

\offlog.txt

{Windows}

\ijl11.dll

\passview.dll

\passview2.dll

PASS2

\passview3.dll

PASS3

\passview4.dll

PASS4

\steam.exe

regsvr32.exe /s "

C:\mic.wav

*data?.pwd

1234567890

explorer.exe "

SKEY

\mic.wav

\mic.wav"

.plugin

\webcam.bmp

\webcam.jpg

PORTS

CMDRV

127.0.0.1

\psp.exe

\psp.exe /stext

\psp2.exe

\psp2.exe /stext

\psp4.exe

\psp4.exe /stext

\psp3.exe

\psp3.exe /stext

\cs.bat

\cs.txt

steam.exe >

cmd.exe /C "

\cs.bat"

Steam account password

WebCap

ping.exe -t

explorer.exe

HNetCfg.FwMgr

HNetCfg.FwAuthorizedApplication

Microsoft Windows

127.0.0.1 dl

.avgate.net

Software\Microsoft\Windows\CurrentVersion\Policies\System

*rootkit.dll

shdef.exe

*.dll

*.ocx

Explorer.exe

\system.ini

.mIntelJPEGLibrary

255.255.255.255

Windows Sockets error

scvhost.exe_1768_rwx_00BA0000_00104000:

34$14$34$

3,$1,$3,$\

3

34$14$34$\

&3

fhN%f

fh.Ff

93,$1,$

3,$1,$3,$

3

[3

1,$3,$1,$

scvhost.exe_1768_rwx_00CB0000_000F2000:

.text

`.data

.rsrc

@.reloc

ntdll.dll

KERNEL32.dll

BaseCleanupAppcompatCacheSupport

BaseInitAppcompatCacheSupport

BaseProcessInitPostImport

CallNamedPipeA

CallNamedPipeW

CmdBatNotification

ConnectNamedPipe

CreateIoCompletionPort

CreateNamedPipeA

CreateNamedPipeW

CreatePipe

DisconnectNamedPipe

GetCPFileNameFromRegistry

GetCPInfo

GetCPInfoExA

GetCPInfoExW

GetConsoleAliasExesA

GetConsoleAliasExesLengthA

GetConsoleAliasExesLengthW

GetConsoleAliasExesW

GetConsoleInputExeNameA

GetConsoleInputExeNameW

GetConsoleKeyboardLayoutNameA

GetConsoleKeyboardLayoutNameW

GetConsoleOutputCP

GetDefaultSortkeySize

GetLargestConsoleWindowSize

GetNamedPipeHandleStateA

GetNamedPipeHandleStateW

GetNamedPipeInfo

GetProcessHandleCount

GetProcessHeap

GetProcessHeaps

GetProcessShutdownParameters

GetSystemWindowsDirectoryA

GetSystemWindowsDirectoryW

GetWindowsDirectoryA

GetWindowsDirectoryW

PeekNamedPipe

RegisterWowExec

SetCPGlobal

SetConsoleInputExeNameA

SetConsoleInputExeNameW

SetConsoleKeyShortcuts

SetConsoleMaximumWindowSize

SetConsoleOutputCP

SetNamedPipeHandleState

SetProcessShutdownParameters

SetThreadExecutionState

TransactNamedPipe

VDMConsoleOperation

VDMOperationStarted

WaitNamedPipeA

WaitNamedPipeW

WinExec

NTDLL.RtlAddVectoredExceptionHandler

NTDLL.RtlDecodePointer

NTDLL.RtlDecodeSystemPointer

NTDLL.RtlDeleteCriticalSection

NTDLL.RtlEncodePointer

NTDLL.RtlEncodeSystemPointer

NTDLL.RtlEnterCriticalSection

NTDLL.RtlGetLastWin32Error

NTDLL.RtlAllocateHeap

NTDLL.RtlFreeHeap

NTDLL.RtlReAllocateHeap

NTDLL.RtlSizeHeap

NTDLL.RtlInitializeSListHead

NTDLL.RtlInterlockedFlushSList

NTDLL.RtlInterlockedPopEntrySList

NTDLL.RtlInterlockedPushEntrySList

NTDLL.RtlLeaveCriticalSection

NTDLL.RtlQueryDepthSList

NTDLL.RtlRemoveVectoredExceptionHandler

NTDLL.RtlRestoreLastWin32Error

NTDLL.RtlCaptureContext

NTDLL.RtlCaptureStackBackTrace

NTDLL.RtlFillMemory

NTDLL.RtlMoveMemory

NTDLL.RtlUnwind

NTDLL.RtlZeroMemory

NTDLL.RtlSetCriticalSectionSpinCount

NTDLL.RtlSetLastWin32Error

NTDLL.RtlTryEnterCriticalSection

NTDLL.VerSetConditionMask

DirOperationControl

UrlCanonicalizeW

SHDeleteKeyW

PathCreateFromUrlW

SetProcessWindowStation

OpenWindowStationA

GetProcessWindowStation

EnumDesktopWindows

CloseWindowStation

twain_32.dll

Jt.HH;

midiOutShortMsg

SXS: %s() LdrFindOutOfProcessResource failed; nt status = lx

advapi32.dll

ReportEventW

RegSaveKeyW

RegSaveKeyExW

RegSaveKeyA

RegRestoreKeyW

RegQueryInfoKeyW

RegOpenKeyW

RegOpenKeyExW

RegOpenKeyExA

RegOpenKeyA

RegNotifyChangeKeyValue

RegEnumKeyW

RegEnumKeyExW

RegDeleteKeyW

RegCreateKeyW

RegCreateKeyExW

RegCloseKey

ElfReportEventW

CryptExportKey

CryptDestroyKey

\Device\NamedPipe\Win32Pipes.x.x

CM_Open_DevNode_Key

CryptCATCatalogInfoFromContext

SetPortW

EnumPrinterKeyW

EnumPortsW

DeletePrinterKeyW

DeletePortW

ConfigurePortW

AddPortW

ShellExecuteW

ShellExecuteExW

ShellExecuteExA

ShellExecuteA

SHFileOperationW

SHFileOperationA

FindExecutableW

FindExecutableA

ImportPrivacySettings

MprConfigTransportGetInfo

MprConfigTransportGetHandle

MprConfigTransportDelete

MprConfigTransportCreate

MprConfigInterfaceTransportRemove

MprConfigInterfaceTransportGetInfo

MprConfigInterfaceTransportGetHandle

MprConfigInterfaceTransportEnum

MprConfigInterfaceTransportAdd

MprAdminTransportCreate

MprAdminPortGetInfo

MprAdminPortEnum

MprAdminInterfaceTransportAdd

MimeOleParseMhtmlUrl

ImmGetVirtualKey

ImageGetCertificateHeader

ImageGetCertificateData

ImageEnumerateCertificates

GdiplusShutdown

|CAGetCertTypePropertyEx

CAGetCertTypeProperty

CAGetCertTypeKeySpec

CAGetCertTypeFlagsEx

CAGetCertTypeFlags

CAGetCertTypeExtensionsEx

CAGetCertTypeExtensions

CAGetCertTypeExpiration

CAGetCACertificate

CAFreeCertTypeProperty

CAFreeCertTypeExtensions

CAFindCertTypeByName

CAEnumNextCertType

CAEnumCertTypesForCAEx

CAEnumCertTypesForCA

CACountCertTypes

CACloseCertType

CACertTypeAccessCheck

ApphelpCheckExe

WZCPassword2Key

EapcfgNodeFromKey

SetupDiOpenDevRegKey

SetupDiCreateDevRegKeyW

SXS: %s() BasepSxsCreateStreams() failed

winlogon.EXE

PWVSSh

SXS: %s - Failing thread create because RtlActivateActivationContextEx() failed with status lx

SXS: %s - Failing thread create because RtlQueryInformationActivationContext() failed with status lx

SXS: %s - Failing thread create becuase NtQueryInformationThread() failed with status lx

u\SSh

kernel32: No mapping for ImageInformation.Machine == x

TermsrvLogInstallIniFile

TermsrvGetWindowsDirectoryW

TermsrvGetWindowsDirectoryA

SXS: %s failing because RtlQueryInformationActivationContext() returned status lx

SXS: %s - Failure getting active activation context; ntstatus lx

SXS: %s() LdrAccessOutOfProcessResource failed; nt status = lx

SXS: %s() LdrCreateOutOfProcessImage failed

SXS: %s() NtQueryInformationFile failed

SXS: %s() empty lpSource %ls

SXS: %s() Calling csrss server failed

SXS: %s() RtlMultiAppendUnicodeStringBuffer failed

SXS: %s() NtMapViewOfSection failed

SXS: %s() AssemblyDirectory is not null terminated

SXS: %s() BaseDllMapResourceIdW failed

SXS: %s() ACTCTX_FLAG_RESOURCE_NAME_VALID set but lpResourceName == 0

SXS: %s() Bad lpAssemblyDirectory %ls

SXS: %s() Bad lpSource PathType %ls, 0x%lx

SXS: %s() Bad lpAssemblyDirectory PathType %ls, 0x%lx

SXS: %s() bad wProcessorArchitecture 0x%x

SXS: Invalid parameter(s) passed to FindActCtxSection*()

->cbSize = %u

SXS: %s() CsrCaptureMessageMultiUnicodeStringsInPlace failed

QSSSSh

\twain_32.dll

ReportFault

SXS: %s() NtCreateSection() failed

SXS: %s() NtOpenFile(%wZ) failed

SXS: %s() Null %p or size 0x%lx too small

SXS: %s() Bad flags/size 0x%lx/0x%lx

.debug

.reloc

.rsrc1

|wzcsapi.dll

wzcdlg.dll

wtsapi32.dll

ws2_32.dll

wmvcore.dll

wmi.dll

wldap32.dll

wintrust.dll

winsta.dll

winspool.drv

winscard.dll

winmm.dll

wininet.dll

winhttp.dll

version.dll

uxtheme.dll

utildll.dll

usp10.dll

userenv.dll

user32.dll

urlmon.dll

tapi32.dll

syssetup.dll

sti.dll

shsvcs.dll

shlwapi.dll

shell32.dll

shdocvw.dll

sfc.dll

setupapi.dll

secur32.dll

scecli.dll

samlib.dll

rtutils.dll

rpcrt4.dll

regapi.dll

rasman.dll

rasdlg.dll

rasapi32.dll

query.dll

pstorec.dll

psapi.dll

printui.dll

powrprof.dll

pidgen.dll

pautoenr.dll

oleaut32.dll

oleacc.dll

ole32.dll

odbc32.dll

ocmanage.dll

ntmarta.dll

ntlsapi.dll

ntlanman.dll

ntdsapi.dll

ntdsa.dll

netshell.dll

netrap.dll

netplwiz.dll

netman.dll

netcfgx.dll

netapi32.dll

mswsock.dll

mssign32.dll

msrating.dll

msimg32.dll

msi.dll

mshtml.dll

msgina.dll

mscat32.dll

msacm32.dll

mprui.dll

mprapi.dll

mpr.dll

mobsync.dll

mlang.dll

lz32.dll

linkinfo.dll

keymgr.dll

kdcsvc.dll

iphlpapi.dll

inetcomm.dll

imm32.dll

imgutil.dll

imagehlp.dll

hnetcfg.dll

gdiplus.dll

gdi32.dll

esent.dll

efsadu.dll

duser.dll

dnsapi.dll

dhcpcsvc.dll

devmgr.dll

ddraw.dll

d3dxof.dll

cscdll.dll

cryptui.dll

crypt32.dll

credui.dll

comdlg32.dll

comctl32.dll

certcli.dll

cdfview.dll

cabinet.dll

browseui.dll

authz.dll

apphelp.dll

advpack.dll

activeds.dll

WinStationIsHelpAssistantSession

WinStationEnumerate_IndexedW

|UnlockUrlCacheEntryStream

UnlockUrlCacheEntryFileW

UnlockUrlCacheEntryFileA

SetUrlCacheEntryInfoW

SetUrlCacheEntryGroupW

SetUrlCacheConfigInfoA

RetrieveUrlCacheEntryStreamW

RetrieveUrlCacheEntryFileW

RetrieveUrlCacheEntryFileA

RegisterUrlCacheNotification

ReadUrlCacheEntryStream

LoadUrlCacheContent

IsHostInProxyBypassList

InternetShowSecurityInfoByURLW

InternetOpenUrlW

InternetOpenUrlA

InternetCreateUrlW

InternetCreateUrlA

InternetCrackUrlW

InternetCrackUrlA

InternetCombineUrlW

InternetCanonicalizeUrlW

InternetCanonicalizeUrlA

HttpSendRequestW

HttpSendRequestExW

HttpSendRequestExA

HttpSendRequestA

HttpQueryInfoW

HttpQueryInfoA

HttpOpenRequestW

HttpOpenRequestA

HttpEndRequestW

HttpEndRequestA

HttpAddRequestHeadersW

HttpAddRequestHeadersA

GetUrlCacheEntryInfoW

GetUrlCacheEntryInfoExW

GetUrlCacheEntryInfoExA

GetUrlCacheEntryInfoA

GetUrlCacheConfigInfoW

GetUrlCacheConfigInfoA

FtpSetCurrentDirectoryW

FtpSetCurrentDirectoryA

FtpRenameFileA

FtpRemoveDirectoryA

FtpPutFileEx

FtpOpenFileW

FtpOpenFileA

FtpGetFileSize

FtpGetFileEx

FtpGetCurrentDirectoryW

FtpGetCurrentDirectoryA

FtpFindFirstFileW

FtpFindFirstFileA

FtpDeleteFileW

FtpDeleteFileA

FtpCreateDirectoryW

FtpCreateDirectoryA

FtpCommandA

FreeUrlCacheSpaceW

FindNextUrlCacheEntryW

FindNextUrlCacheEntryExW

FindNextUrlCacheEntryExA

FindNextUrlCacheEntryA

FindNextUrlCacheContainerW

FindNextUrlCacheContainerA

FindFirstUrlCacheEntryW

FindFirstUrlCacheEntryExW

FindFirstUrlCacheEntryExA

FindFirstUrlCacheEntryA

FindFirstUrlCacheContainerW

FindFirstUrlCacheContainerA

FindCloseUrlCache

DeleteUrlCacheGroup

DeleteUrlCacheEntryW

DeleteUrlCacheEntryA

DeleteUrlCacheContainerA

CreateUrlCacheGroup

CreateUrlCacheEntryW

CreateUrlCacheEntryA

CreateUrlCacheContainerW

CreateUrlCacheContainerA

CommitUrlCacheEntryW

CommitUrlCacheEntryA

|WinHttpSetTimeouts

WinHttpSetStatusCallback

WinHttpSendRequest

WinHttpReceiveResponse

WinHttpQueryHeaders

WinHttpOpenRequest

WinHttpOpen

WinHttpCrackUrl

WinHttpConnect

WinHttpCloseHandle

|UrlMkSetSessionOption

UrlMkGetSessionOption

URLOpenBlockingStreamW

URLDownloadToFileW

URLDownloadToCacheFileW

IsValidURL

GetMarkOfTheWeb

CreateURLMoniker

CoInternetParseUrl

CoInternetIsFeatureEnabledForUrl

CoInternetGetSecurityUrl

CoInternetCombineUrl

SceSetupUpdateSecurityKey

RasShareConnection

RasIsSharedConnection

DsMakePasswordCredentialsW

DsFreePasswordCredentials

|NetpUpgradePreNT5JoinInfo

NetUserChangePassword

NetUnjoinDomain

NetJoinDomain

NetGetJoinInformation

|SpcGetCertFromKey

GetCryptProvFromCert

FreeCryptProvFromCert

|ShowModelessHTMLDialog

MPRUI_DoPasswordDialog

PRShowSaveFromMsginaW

PRShowRestoreFromMsginaW

KRShowKeyMgr

GetUdpStatistics

GetTcpStatistics

|IcfGetOperationalMode

SetViewportOrgEx

SetViewportExtEx

JetMakeKey

CryptUIDlgViewCertificateW

CryptVerifyCertificateSignature

CryptSignAndEncodeCertificate

CryptMsgGetParam

CryptMsgGetAndVerifySigner

CryptMsgClose

CryptImportPublicKeyInfoEx

CryptImportPublicKeyInfo

CryptHashPublicKeyInfo

CryptExportPublicKeyInfo

CertVerifySubjectCertificateContext

CertVerifyCertificateChainPolicy

CertStrToNameW

CertSetCertificateContextProperty

CertRegisterPhysicalStore

CertRDNValueToStrW

CertOpenSystemStoreW

CertOpenStore

CertNameToStrW

CertGetPublicKeyLength

CertGetNameStringW

CertGetIssuerCertificateFromStore

CertGetEnhancedKeyUsage

CertGetCertificateContextProperty

CertGetCertificateChain

CertFreeCertificateContext

CertFreeCertificateChain

CertFreeCTLContext

CertFindSubjectInCTL

CertFindExtension

CertFindCertificateInStore

CertFindCTLInStore

CertEnumCertificatesInStore

CertDuplicateCertificateContext

CertDuplicateCTLContext

CertDeleteCertificateFromStore

CertCreateCertificateContext

CertCreateCTLContext

CertControlStore

CertCompareCertificateName

CertCloseStore

CertAddCertificateContextToStore

CredUICmdLinePromptForCredentialsW

SSSSh

PSSSSSSh

t.PSW

mem16.dll

ImpersonateNamedPipeClient

VWSSh

t.hlt

hypertrm.exe"

hypertrm.exe

.exr (exception record)

.cxr (context record)

serialui.dll

mekr386.exe

PVWSSh

SXS: %s() BaseDllMapResourceIdA failed

-. "%ls" %ld

(LRU) (Exe Name) (FileSize)

Total Entries = 0x%x

xpsp2res.dll

xpsp3res.dll

?456789:;

!"#$%&'()* ,-./0123

|CertAutoEnrollment

VSSHP

NtQueryValueKey

NtOpenKey

NtFlushKey

NtSetValueKey

NtCreateKey

NtEnumerateKey

NtEnumerateValueKey

RtlFormatCurrentUserKeyPath

NtQueryKey

NtDeleteValueKey

RtlGetProcessHeaps

NtCreateNamedPipeFile

NtSetThreadExecutionState

LdrQueryImageFileExecutionOptions

NtDelayExecution

NtYieldExecution

kernel32.pdb

0!1'1;1|1

;,

67

2,242

: :$:(:,:0:4:8:<:>

8 8$8(8,8084888

$0(040:0

1!202

4 4$4(4,4044484

sShortDate

win.ini

.Config

.Manifest

\Software\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\Layers

\Windows

\NLS\NlsSectionSortkey

\system32\Apphelp.dll

\Registry\MACHINE\System\CurrentControlSet\Control\Session Manager\AppCertDlls

\Registry\Machine\Software\Policies\Microsoft\Windows\Safer\CodeIdentifiers

ADVAPI32.DLL

\\.\MountPointManager

\Registry\Machine\System\CurrentControlSet\Services\Tcpip\Parameters

hotkey.%u %s

wowexec.pif

cmd /c

hotkey.

setup.exe

\DosDevices\pipe\

\\.\pipe\

\REGISTRY\USER\.DEFAULT

WUSER32.DLL

~RF%4x.TMP

netmsg.dll

pipe\

c:\temp\

EmbdTrst.DLL

\Software\Policies\Microsoft\Windows\Safer\CodeIdentifiers

%ws%u\DosDevices\%ws

WINDOWS

\\?\GLOBALROOT

Application.Manifest

"/\[]:| =;,?

\REGISTRY\Machine\Software\Microsoft\Windows NT\currentVersion\Time Zones

\Registry\Machine\Software\Policies\Microsoft\Windows\System

AppCertDlls

tsappcmp.dll

\inifile.upd

t\Registry\Machine\Software\Microsoft\Windows NT\CurrentVersion\AeDebug

DRMHeader.SubscriptionContentID

DRMHeader.ContentDistributor

DRMHeader.SECURITYVERSION

DRMHeader.CID

DRMHeader.LAINFO

DRMHeader.KID

LicenseStateData.Transfer.NONSDMI

LicenseStateData.Transfer.SDMI

LicenseStateData.Print.redbook

LicenseStateData.Play

ActionAllowed.Backup

ActionAllowed.Transfer.NONSDMI

ActionAllowed.Transfer.SDMI

ActionAllowed.Print.redbook

ActionAllowed.Play

BaseLAURL

Transfer.NONSDMI

Transfer.SDMI

Print.redbook

Software\Microsoft\Windows NT\CurrentVersion\Time Zones

TimeZoneKeyName

PendingFileRenameOperations%d

PendingFileRenameOperations

%s\system32\

\system32\faultrep.dll

mwowcmdline

cmdline

CONSOLE.DLL

conime.exe

\Registry\Machine\Software\Microsoft\Windows NT\CurrentVersion\Console

\INF\INTL.INF

DNSAPI.DLL

cfgmgr32.dll

The operation completed successfully.

Not enough storage is available to complete this operation.

The process cannot access the file because another process has locked a portion of the file.

The request is not supported.

Windows cannot find the network path. Verify that the network path is correct and the destination computer is not busy or turned off. If Windows still cannot find the network path, contact your network administrator.

The specified server cannot perform the requested operation.

The specified network password is not correct.

The pipe has been ended.

The system does not support the command requested.

This function is not supported on this system.

The data area passed to a system call is too small.

Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O.

A JOIN or SUBST command cannot be used for a drive that contains previously joined drives.

An attempt was made to use a JOIN or SUBST command on a drive that has already been joined.

An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted.

The system tried to delete the JOIN of a drive that is not joined.

The system tried to join a drive to a directory on a joined drive.

The system tried to join a drive to a directory on a substituted drive.

The system tried to SUBST a drive to a directory on a joined drive.

The system cannot perform a JOIN or SUBST at this time.

The system cannot join or substitute a drive to or for a directory on the same drive.

An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute.

System trace information was not specified in your CONFIG.SYS file, or tracing is disallowed.

DosMuxSemWait did not execute; too many semaphores are already set.

The file system does not support atomic changes to the lock type.

The operating system cannot run %1.

The flag passed is not correct.

The operating system cannot run this application program.

The operating system is not presently configured to run this application.

The pipe state is invalid.

All pipe instances are busy.

The pipe is being closed.

No process is on the other end of the pipe.

The wait operation timed out.

The mounted file system does not support extended attributes.

The volume is too fragmented to complete this operation.

There is a process on other end of the pipe.

Waiting for a process to open the other end of the pipe.

The I/O operation has been aborted because of either a thread exit or an application request.

Overlapped I/O operation is in progress.

Error performing inpage operation.

The requested operation cannot be performed in full-screen mode.

The configuration registry key is invalid.

The configuration registry key could not be opened.

The configuration registry key could not be read.

The configuration registry key could not be written.

An I/O operation initiated by the registry failed unrecoverably. The registry could not read in, or write out, or flush, one of the files that contain the system's image of the registry.

Illegal operation attempted on a registry key that has been marked for deletion.

Cannot create a symbolic link in a registry key that already has subkeys or values.

Cannot create a stable subkey under a volatile parent key.

The account name is invalid or does not exist, or the password is invalid for the account name specified.

The executable program that this service is configured to run in does not implement the service.

A serial I/O operation was completed by another write to the serial port.

A serial I/O operation completed because the timeout period expired.

The floppy disk controller reported an error that is not recognized by the floppy disk driver.

While accessing the hard disk, a recalibrate operation failed, even after retries.

While accessing the hard disk, a disk operation failed even after retries.

An attempt was made to create more links on a file than the file system supports.

The specified program requires a newer version of Windows.

The specified program is not a Windows or MS-DOS program.

The specified program was written for an earlier version of Windows.

No application is associated with the specified file for this operation.

The message can be used only with synchronous operations.

The device has indicated that cleaning is required before further operations are attempted.

There was no match for the specified key in the index.

The point passed to GetMouseMovePoints is not in the buffer.

The format of the specified password is invalid.

The operation was canceled by the user.

The requested operation cannot be performed on a file with a user-mapped section open.

The network transport endpoint already has an address associated with it.

An operation was attempted on a nonexistent network connection.

An invalid operation was attempted on an active network connection.

The network location cannot be reached. For information about network troubleshooting, see Windows Help.

No service is operating at the destination network endpoint on the remote system.

The operation could not be completed. A retry should be performed.

The network address could not be used for the operation requested.

The operation being requested was not performed because the user has not been authenticated.

The operation being requested was not performed because the user has not logged on to the network.

An attempt was made to perform an initialization operation when initialization has already been completed.

This operation is supported only when you are connected to the server.

This operation is not supported on a Microsoft Small Business Server

The remote system is not available. For information about network troubleshooting, see Windows Help.

Windows cannot open this program because it has been prevented by a software restriction policy. For more information, open Event Viewer or contact your system administrator.

KDC certificate during smartcard logon.

The smartcard certificate used for authentication has been revoked.

An untrusted certificate authority was detected While processing the

smartcard certificate used for authentication. Please contact your system

The revocation status of the smartcard certificate used for

The smartcard certificate used for authentication was not trusted. Please

The smartcard certificate used for authentication has expired. Please

A dynamic link library (DLL) referenced a module that was neither a DLL nor the process's executable image.

No encryption key is available. A well-known encryption key was returned.

The password is too complex to be converted to a LAN Manager password. The LAN Manager password returned is a NULL string.

An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client.

Unable to update the password. The value provided as the current password is incorrect.

Unable to update the password. The value provided for the new password contains values that are not allowed in passwords.

Unable to update the password. The value provided for the new password does not meet the length, complexity, or history requirement of the domain.

Logon failure: unknown user name or bad password.

Logon failure: user account restriction. Possible reasons are blank passwords not allowed, logon hour restrictions, or a policy restriction has been enforced.

Logon failure: the specified account password has expired.

Unable to perform a security operation on an object that has no associated security.

The security account manager (SAM) or local security authority (LSA) server was in the wrong state to perform the security operation.

The domain was in the wrong state to perform the security operation.

This operation is only allowed for the Primary Domain Controller of the domain.

Unable to complete the requested operation because of either a catastrophic media failure or a data structure corruption on the disk.

The logon session is not in a state that is consistent with the requested operation.

Unable to impersonate using a named pipe until data has been read from that pipe.

The transaction state of a registry subtree is incompatible with the requested operation.

Cannot perform this operation on built-in accounts.

Cannot perform this operation on this built-in special group.

Cannot perform this operation on this built-in special user.

A cross-encrypted password is necessary to change a user password.

A cross-encrypted password is necessary to change this user password.

There is no user session key for the specified logon session.

Mutual Authentication failed. The server's password is out of date at the domain controller.

This operation can not be performed on the current domain.

Hot key is already registered.

Class still has open windows.

Hot key is not registered.

This list box does not support tab stops.

Child windows cannot have menus.

All handles to windows in a multiple-window position structure must have the same parent.

The paging file is too small for this operation to complete.

Invalid keyboard layout handle.

This operation requires an interactive window station.

This operation returned because the timeout period expired.

The event log file has changed between read operations.

The Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode, or if the Windows Installer is not correctly installed. Contact your support personnel for assistance.

The configuration data for this product is corrupt. Contact your support personnel.

This installation package cannot be installed by the Windows Installer service. You must install a Windows service pack that contains a newer version of the Windows Installer service.

SQL query syntax invalid or unsupported.

This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer package.

This installation package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer package.

There was an error starting the Windows Installer service user interface. Contact your support personnel.

The language of this installation package is not supported by your system.

Function could not be executed.

Function failed during execution.

Data of this type is not supported.

The Windows Installer service failed to start. Contact your support personnel.

This installation package is not supported by this processor type. Contact your product vendor.

This patch package could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer patch package.

This patch package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer patch package.

This patch package cannot be processed by the Windows Installer service. You must install a Windows service pack that contains a newer version of the Windows Installer service.

Invalid command line argument. Consult the Windows Installer SDK for detailed command line help.

The requested operation completed successfully. The system will be restarted so the changes can take effect.

The upgrade patch cannot be installed by the Windows Installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer an

The RPC protocol sequence is not supported.

Not enough resources are available to complete this operation.

The RPC server is too busy to complete this operation.

The remote procedure call failed and did not execute.

The transfer syntax is not supported by the RPC server.

The universal unique identifier (UUID) type is not supported.

The name syntax is not supported.

The server endpoint cannot perform the operation.

No interfaces have been exported.

There is nothing to unexport.

The requested operation is not supported.

A floating-point operation at the RPC server caused a division by zero.

A null context handle was passed from the client to the host during a remote procedure call.

The binding handles passed to a remote procedure call do not match.

A null reference pointer was passed to the stub.

The supplied user buffer is not valid for the requested operation.

The specified port is unknown.

The requested authentication level is not supported.

The error specified is not a valid Windows RPC error code.

Invalid operation on the encoding/decoding handle.

The RPC pipe object is invalid or corrupted.

An invalid operation was attempted on an RPC pipe object.

Unsupported RPC pipe version.

The user's password must be changed before logging on the first time.

The object exporter specified was not found.

Invalid asynchronous RPC call handle for this operation.

The RPC pipe object has already been closed.

The RPC call completed before all pipes were processed.

No more data is available from the RPC pipe.

Not all object UUIDs could be exported to the specified entry.

Interface could not be exported to the specified entry.

The window style or class attribute is invalid for this operation.

The requested metafile operation is not supported.

The requested transformation operation is not supported.

The requested clipping operation is not supported.

The network connection was made successfully, but the user had to be prompted for a password other than the one originally specified.

The requested operation is not allowed when there are jobs queued to the printer.

The requested operation is successful. Changes will not be effective until the system is rebooted.

The requested operation is successful. Changes will not be effective until the service is restarted.

The importation from the file failed.

The GUID passed was not recognized as valid by a WMI data provider.

The instance name passed was not recognized as valid by a WMI data provider.

The data item ID passed was not recognized as valid by a WMI data provider.

The medium currently exists in an offline library and must be online to perform this operation.

The operation cannot be performed on an offline library.

The library, drive, or media pool must be empty to perform this operation.

A resource required for this operation is disabled.

The drive cannot be cleaned or does not support cleaning.

The resource required for this operation does not exist.

The operation identifier is not valid.

The operator or administrator has refused the request.

The transport cannot access the medium.

Unable to retrieve status about the transport.

Cannot use the transport because it is already in use.

Unable to open or close the inject/eject port.

The media type cannot be removed from this library since at least one drive in the library reports it can support this media type.

The remote storage service is not operational at this time.

A cluster node is not available for this operation.

The operation could not be completed because the cluster group is not online.

The operation could not be completed because the cluster resource is online.

The group or resource is not in the correct state to perform the requested operation.

A cluster network is not available for this operation.

All cluster nodes must be running to perform this operation.

A node is in the process of joining the cluster.

A cluster join operation is not in progress.

This operation cannot be performed on the cluster resource as it the quorum resource. You may not bring the quorum resource offline or modify its possible owners list.

The cluster node is not ready to perform the requested operation.

The cluster join operation was aborted.

The cluster join operation failed due to incompatible software versions between the joining node and its sponsor.

The system configuration changed during the cluster join or form operation. The join or form operation was aborted.

The specified node does not support a resource of this type. This may be due to version inconsistencies or due to the absence of the resource DLL on this node.

The specified resource name is not supported by this resource DLL. This may be due to a bad (or changed) name supplied to the resource DLL.

The join operation failed because the cluster database sequence number has changed or is incompatible with the locker node. This may happen during a join operation if the cluster database was changing during the join.

The resource monitor will not allow the fail operation to be performed while the resource is in its current state. This may happen if the resource is in a pending state.

An operation was attempted that is incompatible with the current membership state of the node.

The join operation failed because the cluster instance ID of the joining node does not match the cluster instance ID of the sponsor node.

This computer cannot be made a member of a cluster because it does not have the correct version of Windows installed.

There are no EFS keys defined for the user.

The specified file is not in the defined EFS export format.

The server is not trusted for remote encryption operation.

Recovery policy configured for this system contains invalid recovery certificate.

The encryption algorithm used on the source file needs a bigger key buffer than the one on the destination file.

The disk partition does not support file encryption.

A registry key for event logging could not be created for this session.

A close operation is pending on the session.

The MODEM.INF file was not found.

The modem name was not found in MODEM.INF.

Transport driver error

The requested operation cannot be completed because the terminal connection is currently busy processing a connect, disconnect, reset, or delete operation.

An attempt has been made to connect to a session whose video mode is not supported by the current client.

DOS graphics mode is not supported.

The requested operation can be performed only on the system console.

Disconnecting the console session is not supported.

Reconnecting a disconnected session to the console is not supported.

The remote control of the console was terminated because the display mode was changed. Changing the display mode in a remote control session is not supported.

The requested operation could not be performed because the directory service is not the master for that type of operation.

The requested operation did not satisfy one or more constraints associated with the class of the object.

The directory service can perform the requested operation only on a leaf object.

The directory service cannot perform the requested operation on the RDN attribute of an object.

The requested cross-domain move operation could not be performed.

An operations error occurred.

The requested authentication method is not supported by the server.

The server does not support the requested critical extension.

The operation affects multiple DSAs

The server is not operational.

The specified method is not supported.

The specified control is not supported by the server.

The add replica operation cannot be performed. The naming context must be writable in order to create the replica.

The attribute specified in the operation is not present on the object.

Illegal modify operation. Some aspect of the modification is not permitted.

The operation must be performed at a master DSA.

The operation could not be performed because the object's parent is either uninstantiated or deleted.

The operation cannot be performed because child objects exist. This operation can only be performed on a leaf object.

The operation is out of scope.

The operation cannot continue because the object is in the process of being removed.

The operation can only be performed on an internal master DSA object.

Insufficient access rights to perform the operation.

The operation cannot be performed on a back link.

The operation could not be performed because the directory service is shutting down.

The requested FSMO operation failed. The current FSMO holder could not be contacted.

Subtree notifications are only supported on NC heads.

The requested delete operation could not be performed.

The global catalog verification failed. The global catalog is not available or does not support the operation. Some part of the directory is currently not available.

The replication operation failed because of a schema mismatch between the servers involved.

The operation cannot replace the hidden record.

This directory server is shutting down, and cannot take ownership of new floating single-master operation roles.

The directory service is missing mandatory configuration information, and is unable to determine the ownership of floating single-master operation roles.

The directory service was unable to transfer ownership of one or more floating single-master operation roles to other servers.

The replication operation failed.

An invalid parameter was specified for this replication operation.

The directory service is too busy to complete the replication operation at this time.

The distinguished name specified for this replication operation is invalid.

The naming context specified for this replication operation is invalid.

The distinguished name specified for this replication operation already exists.

The replication operation encountered a database inconsistency.

The server specified for this replication operation could not be contacted.

The replication operation encountered an object with an invalid instance type.

The replication operation failed to allocate memory.

The replication operation encountered an error with the mail system.

The replication operation encountered a database error.

The requested operation is not supported by this version of the directory service.

The replication operation failed due to a collision of object names.

The replication operation failed because a required parent object is missing.

The replication operation was preempted.

The replication operation was terminated because the system is shutting down.

The server specified for this replication operation was contacted, but that server was unable to contact an additional server needed to complete the operation.

The version of the Active Directory schema of the source forest is not compatible with the version of Active Directory on this computer. You must upgrade the operating system on a domain controller in the source forest before this computer can be added as a domain controller to that forest.

The requested operation requires a directory service, and none was available.

The requested search operation is only supported for base searches.

The schema update operation tried to add a backward link attribute that has no corresponding forward link.

Source and destination for the cross-domain move operation are identical. Caller should use local move operation instead of cross-domain move operation.

Another operation which requires exclusive access to the PDC FSMO is already in progress.

A cross-domain move operation failed such that two versions of the moved object exist - one each in the source and destination domains. The destination object needs to be removed to restore the system to a consistent state.

The directory cannot validate the proposed naming context name because it does not hold a replica of the naming context above the proposed naming context. Please ensure that the domain naming master role is held by a server that is configured as a global catalog server, and that the server is up to date with its replication partners. (Applies only to Windows 2000 Domain Naming masters)

The operation can not be performed because the server does not have an infrastructure container in the domain of interest.

The replica/child install failed to read the objectVersion attribute in the SCHEMA section of the file schema.ini in the system32 directory.

Only DSAs configured to be Global Catalog servers should be allowed to hold the Domain Naming Master FSMO role. (Applies only to Windows 2000 servers)

The DSA operation is unable to proceed because of a DNS lookup failure.

The object requested was not found, but an object with that key was found.

The syntax of the linked attribute being added is incorrect. Forward links can only have syntax 2.5.5.1, 2.5.5.7, and 2.5.5.14, and backlinks can only have syntax 2.5.5.1

Security Account Manager needs to get the boot password.

Security Account Manager needs to get the boot key from floppy disk.

The operation requires that destination domain auditing be enabled.

The operation couldn't locate a DC for the source domain.

The replication operation could not be completed due to a schema incompatibility.

The replication operation could not be completed due to a previous schema incompatibility.

The replication update could not be applied because either the source or the destination has not yet received information regarding a recent cross-domain move operation.

The requested operation can be performed only on a global catalog server.

The operation requires that source domain auditing be enabled.

A Filter was passed that uses constructed attributes.

Your computer could not be joined to the domain. You have exceeded the maximum number of computer accounts you are allowed to create in this domain. Contact your system administrator to have this limit reset or increased.

For security reasons, the operation must be run on the destination DC.

Critical Directory Service System objects cannot be deleted during tree delete operations. The tree delete may have been partially performed.

This version of Windows is too old to support the current directory forest behavior. You must upgrade the operating system on this server before it can become a domain controller in this forest.

This version of Windows is too old to support the current domain behavior. You must upgrade the operating system on this server before it can become a domain controller in this domain.

This version of Windows no longer supports the behavior version in use in this directory forest. You must advance the forest behavior version before this server can become a domain controller in the forest.

This version of Windows no longer supports the behavior version in use in this domain. You must advance the domain behavior version before this server can become a domain controller in the domain.

The version of Windows is incompatible with the behavior version of the domain or forest.

The sort order requested is not supported.

Unable to continue operation because multiple conflicting controls were used.

Rename or move operations on naming context heads or read-only objects are not allowed.

Move operations on objects in the schema naming context are not allowed.

The requested action is not supported on standard server.

The directory service cannot perform the requested operation because the servers

Operation not allowed on a disabled cross ref.

Schema update failed: Duplicate msDS-INtId. Retry the operation.

The remote create cross reference operation failed on the Domain Naming Master FSMO. The operation's error is in the extended data.

DNS request not supported by name server.

DNS operation refused.

DNS bad key.

Try DNS operation again later.

The operation requested is not permitted on a DNS root server.

Invalid operation for DNS zone.

The operation cannot be performed because this zone is shutdown.

TCP/IP network protocol not installed.

A blocking operation was interrupted by a call to WSACancelBlockingCall.

A non-blocking socket operation could not be completed immediately.

A blocking operation is currently executing.

An operation was attempted on a non-blocking socket that already had an operation in progress.

An operation was attempted on something that is not a socket.

A required address was omitted from an operation on a socket.

A protocol was specified in the socket function call that does not support the semantics of the socket type requested.

An unknown, invalid, or unsupported option or level was specified in a getsockopt or setsockopt call.

The support for the specified socket type does not exist in this address family.

The attempted operation is not supported for the type of object referenced.

Only one usage of each socket address (protocol/network address/port) is normally permitted.

A socket operation encountered a dead network.

A socket operation was attempted to an unreachable network.

The connection has been broken due to keep-alive activity detecting a failure while the operation was in progress.

An operation on a socket could not be performed because the system lacked sufficient buffer space or because a queue was full.

A socket operation failed because the destination host was down.

A socket operation was attempted to an unreachable host.

A Windows Sockets implementation may have a limit on the number of applications that may use it simultaneously.

The Windows Sockets version requested is not supported.

The specified transport mode filter already exists.

The specified transport mode filter does not exist.

The requested lookup key was not found in any active activation context.

The transport filter is pending deletion.

IKE failed to find valid machine certificate

Certificate Revocation Check failed

Invalid certificate key usage

Invalid certificate type

No private key associated with machine certificate

Peer's certificate did not have a public key

Error processing Cert payload

Error processing Certificate Request payload

Peer failed to send valid machine certificate

Certification Revocation check of peer's certificate failed

Failed to load SECURITY.DLL.

Unsupported ID

Invalid certificate signature

The lifetime value received in the Responder Lifetime Notify is below the Windows 2000 configured minimum value. Please fix the policy on the peer machine.

Key length in certificate is too small for configured security requirements.

Lack of system resources has required isolated activation to be disabled for the current thread of execution.

Manifest Parse Error : System does not support the specified encoding.

Manifest Parse Error : Switch from current encoding to specified encoding not supported.

Assembly Protection Error : The public key for an assembly was too short to be allowed.

The storage operation should block until more data is available.

The storage operation should retry immediately.

The notified event sink will not influence the storage operation.

Drag-drop operation canceled

FORMATETC not supported

Invalid window handle passed

An asynchronous operation was specified. The operation has begun, but its outcome is not known yet.

The transaction was successfully aborted. However, this is a coordinated transaction, and some number of enlisted resources were aborted outright because they could not support abort-retaining semantics

An abort operation was already in progress.

No such interface supported

Operation aborted

The data necessary to complete this operation is not yet available.

Use of Ole1 services requiring DDE windows is disabled

The server process could not be started because the configured identity is incorrect. Check the username and password.

The operation attempted is not supported.

Unable to complete the call since there is no COM security context inside IObjectControl.Activate.

The callee (server [not server application]) is not available and disappeared; all connections are invalid. The call may have executed.

The callee (server [not server application]) is not available and disappeared; all connections are invalid. The call did not execute.

Impersonate on unsecure calls is not supported.

Unable to obtain the Windows directory

The version of ACL format in the stream is not supported by this implementation of IAccessControl

Does not support a collection.

Wrong module kind for the operation.

Unable to perform requested operation.

Attempted an operation on an invalid object.

There is insufficient memory available to complete operation.

An error occurred during a seek operation.

A disk error occurred during a write operation.

A disk error occurred during a read operation.

There is insufficient disk space to complete operation.

Share.exe or equivalent is required for operation.

Illegal operation called on non-file based storage.

Illegal operation called on object with extant marshallings.

OLE32.DLL has been loaded at the wrong address.

Copy Protection Error - The given sector does not have a valid CSS key.

Copy Protection Error - DVD session key not established.

Need to run the object to perform this operation

There is no cache to operate on

Object is static; operation not allowed

compobj.dll is too old for the ole2.dll initialized

Not able to perform the operation because object is not given storage yet

Object doesn't support IViewObject interface

Class does not support aggregation (or class object is remote)

Could not read key from registry

Could not write key to registry

Could not find the key in the registry

A network error interrupted the operation.

There was an error in a Windows GDI call while converting the bitmap to a DIB

There was an error in a Windows GDI call while converting the DIB to a bitmap.

Operation exceeded deadline

Operation unavailable

Intermediate operation failed

User input required for operation to succeed

COM is required for this operation, but is not installed

Task Scheduler security services are available only on Windows NT.

The task object version is either unsupported or invalid.

The task has been configured with an unsupported combination of account settings and run time options.

A retaining commit or abort is not supported

The requested isolation level is not valid or supported.

The transaction manager doesn't support an asynchronous operation for this method.

The requested semantics of retention of isolation across retaining commit and abort boundaries cannot be supported by this transaction implementation, or isoFlags was not equal to zero.

An import object for the transaction could not be found.

A time-out was specified, but time-outs are not supported.

The requested operation is already in progress for the transaction.

The Transaction Manager has disabled its support for TIP.

The transaction manager has disabled its support for remote/network transactions.

The partner transaction manager has disabled its support for remote/network transactions.

The transaction manager has disabled its support for XA transactions.

The requested operation requires that JIT be in the current context and it is not

The requested operation requires that the current context have a Transaction, and it does not

Server execution failed

Bad Key.

Key not valid for use in specified state.

Key does not exist.

Insufficient memory available for the operation.

Provider's public key is invalid.

Keyset does not exist

The keyset is not defined.

Keyset as registered is invalid.

The Keyset parameter is invalid.

The key parameters could not be set because the CSP uses fixed parameters.

The function requested is not supported

The per-message Quality of Protection is not supported by the security package

The certificate chain was issued by an authority that is not trusted.

An unknown error occurred while processing the certificate.

The received certificate has expired.

The other end of the security negotiation is requires strong crypto but it is not supported on the local machine.

The client cert name does not matches the user name or the KDC name is incorrect.

The encryption type requested is not supported by the KDC.

An unsupported preauthentication mechanism was presented to the kerberos package.

The requested operation requires delegation to be enabled on the machine.

The received certificate was mapped to multiple accounts.

SEC_E_NO_KERB_KEY

An error occurred while performing an operation on a cryptographic message.

The streamed cryptographic message requires more data to complete the decode operation.

An error occurred during encode or decode operation.

The specified certificate is self signed.

The previous certificate or CRL context was deleted.

The certificate does not have a property that references a private key.

Cannot find the certificate and private key for decryption.

Cannot find the certificate and private key to use for decryption.

The certificate is revoked.

No Dll or exported function was found to verify revocation.

The revocation function was unable to check revocation for the certificate.

The certificate is not in the revocation server's database.

The string contains an invalid X500 name attribute key, oid, value or delimiter.

The dwValueType for the CERT_NAME_VALUE is not one of the character strings. Most likely it is either a CERT_RDN_ENCODED_BLOB or CERT_TDN_OCTED_STRING.

The Put operation can not continue. The file needs to be resized. However, there is already a signature present. A complete signing operation must be done.

The cryptographic operation failed due to a local security option setting.

No DLL or exported function was found to verify subject usage.

The subject was not found in a Certificate Trust List (CTL).

None of the signers of the cryptographic message or certificate trust list is trusted.

The public key's algorithm parameters are missing.

OSS Certificate encode/decode error code base

OSS ASN.1 Error: Unsupported BER indefinite-length encoding.

ASN1 Certificate encode/decode error code base.

ASN1 function not supported for this PDU.

The request's current status does not allow this operation.

The certification authority's certificate contains invalid data.

Certificate service has been suspended for a database restore operation.

The certificate contains an encoded length that is potentially incompatible with older enrollment software.

The operation is denied. The user has multiple roles assigned and the certification authority is configured to enforce role separation.

The operation is denied. It can only be performed by a certificate manager that is allowed to manage certificates for the current requester.

Cannot archive private key. The certification authority is not configured for key archival.

Cannot archive private key. The certification authority could not verify one or more key recovery certificates.

The request is incorrectly formatted. The encrypted private key must be in an unauthenticated attribute in an outermost signature.

The request contains an invalid renewal certificate attribute.

An attempt was made to open a Certification Authority database session, but there are already too many active sessions. The server may need to be configured to allow additional sessions.

The permissions on this certification authority do not allow the current user to enroll for certificates.

The permissions on the certificate template do not allow the current user to enroll for this type of certificate.

The requested certificate template is not supported by this CA.

The request contains no certificate template information.

The request is missing a required private key for archival by the server.

The request was made on behalf of a subject other than the caller. The certificate template must be configured to require at least one signature to authorize the request.

The request template version is newer than the supported template version.

The request includes a private key for archival by the server, but key archival is not enabled for the specified certificate template.

The public key does not meet the minimum size required by the specified certificate template.

The key is not exportable.

You cannot add the root CA certificate into your local store.

The key archival hash attribute was not found in the response.

An unexpetced key archival hash attribute was found in the response.

There is a key archival hash mismatch between the request and the response.

Signing certificate cannot include SMIME extension.

The certificate for the signer of the message is invalid or not found.

The signature of the certificate can not be verified.

The timestamp signature and/or certificate could not be verified or is malformed.

A certificate's basic constraint extension has not been observed.

The certificate does not meet or contain the Authenticode financial extensions.

The file did not pass the hints check.

Failed on a file operation (open, map, read, write).

The trust verification action specified is not supported by the specified trust provider.

The form specified for the subject is not one supported or known by the specified trust provider.

A required certificate is not within its validity period when verifying against the current system clock or the timestamp in the signed file.

The validity periods of the certification chain do not nest correctly.

A certificate that can only be used as an end-entity is being used as a CA or visa versa.

A path length constraint in the certification chain has been violated.

A certificate contains an unknown extension that is marked 'critical'.

A certificate being used for a purpose other than the ones specified by its CA.

A parent of a given certificate in fact did not issue that child certificate.

A certificate is missing or has an empty value for an important field, such as a subject or issuer name.

A certificate chain processed, but terminated in a root certificate which is not trusted by the trust provider.

An internal certificate chaining error has occurred.

A certificate was explicitly revoked by its issuer.

The certification path terminates with the test root which is not trusted with the current policy settings.

The revocation process could not continue - the certificate(s) could not be checked.

The certificate's CN name does not match the passed value.

The certificate is not valid for the requested usage.

The certificate was explicitly marked as untrusted by the user.

A certification chain processed correctly, but one of the CA certificates is not trusted by the policy provider.

The certificate has invalid policy.

The certificate has an invalid name. The name is not included in the permitted list or is explicitly excluded.

The requested device registry key does not exist.

The operation cannot be performed on a device information element that has not been registered.

The operation does not require any files to be copied.

The operation cannot be performed because the device information set is locked.

The operation cannot be performed because the device information element is locked.

The operation cannot be performed because the file queue is locked.

The operation cannot be performed because the device interface is currently active.

The operation cannot be performed because the device interface has been removed from the system.

The driver selected for this device does not support Windows XP.

The driver selected for this device does not support Windows.

Operation not allowed in WOW64.

The operation involving unsigned file copying was rolled back, so that a system restore point could be set.

An INF was copied into the Windows INF directory in an improper manner.

The operation requires a Smart Card, but no Smart Card is currently in the device.

The operation has been aborted to allow the server application to exit.

The reader driver does not meet minimal requirements for support.

The smart card does not meet minimal requirements for support.

The requested order of object creation is not supported.

This smart card does not support the requested feature.

The requested certificate does not exist.

The requested certificate could not be obtained.

A communications error with the smart card has been detected. Retry the operation.

The requested key container does not exist on the smart card.

The identity or password set on the application is not valid

The DLL does not support the components listed in the TypeLib

The server catalog version is not supported

This operation can not be performed on the system application

This operation is not enabled on this platform

Application Proxy is not exportable

System application is not exportable

Can not subscribe to this component (the component may have been imported)

The partition cannot be exported, because one or more components in the partition have the same file name

Applications that contain one or more imported components cannot be installed into a non-base partition

The COM Catalog Server threw an exception during execution

MSMQ is required for the requested operation and is not installed

Unable to marshal an interface that does not support IPersistStream

The ProgID provided to the copy operation is invalid. The ProgID is in use by another registered CLSID.

Only Application Files (*.MSI files) can be installed into partitions.

Applications containing one or more legacy components may not be exported to 1.0 format.

The SID filtering operation removed all SIDs.

Windows NT BASE API Client DLL

5.1.2600.5512 (xpsp.080413-2111)

Windows

Operating System

5.1.2600.5512

$$$$Guinea$Republic of Guinea)$$$$Guyana$Cooperative Republic of Guyana

$$$$Panama$Republic of Panama $$$$Portugal$Portuguese Republic:$$$$Papua New Guinea$Independent State of Papua New Guinea

$$$$Turkey$Republic of Turkey

$$$860 (OEM - Portuguese)

Portuguese (Brazil)$Brazil $$$1047 (IBM EBCDIC - Latin-1/Open System)

Turkish$Turkey

Portuguese (Portugal)$Portugal

scvhost.exe_1768_rwx_00DB0000_0008E000:

.text

`.data

.rsrc

@.reloc

GDI32.dll

KERNEL32.dll

NTDLL.DLL

ImmProcessKey

USER32.dll

ActivateKeyboardLayout

ArrangeIconicWindows

CallMsgFilter

CallMsgFilterA

CallMsgFilterW

CascadeChildWindows

CascadeWindows

CliImmSetHotKey

CloseWindowStation

CreateDialogIndirectParamA

CreateDialogIndirectParamAorW

CreateDialogIndirectParamW

CreateWindowStationA

CreateWindowStationW

DisableProcessWindowsGhosting

DisplayExitWindowsWarnings

EnumChildWindows

EnumDesktopWindows

EnumThreadWindows

EnumWindowStationsA

EnumWindowStationsW

EnumWindows

ExitWindowsEx

GetAsyncKeyState

GetKeyNameTextA

GetKeyNameTextW

GetKeyState

GetKeyboardLayout

GetKeyboardLayoutList

GetKeyboardLayoutNameA

GetKeyboardLayoutNameW

GetKeyboardState

GetKeyboardType

GetProcessWindowStation

LoadKeyboardLayoutA

LoadKeyboardLayoutEx

LoadKeyboardLayoutW

LockWindowStation

MapVirtualKeyA

MapVirtualKeyExA

MapVirtualKeyExW

MapVirtualKeyW

MsgWaitForMultipleObjects

MsgWaitForMultipleObjectsEx

OemKeyScan

OpenWindowStationA

OpenWindowStationW

RegisterHotKey

SetConsoleReserveKeys

SetKeyboardState

SetProcessWindowStation

SetWindowStationUser

SetWindowsHookA

SetWindowsHookExA

SetWindowsHookExW

SetWindowsHookW

TileChildWindows

TileWindows

UnhookWindowsHook

UnhookWindowsHookEx

UnloadKeyboardLayout

UnlockWindowStation

UnregisterHotKey

VkKeyScanA

VkKeyScanExA

VkKeyScanExW

VkKeyScanW

WINNLSGetIMEHotkey

keybd_event

=.cmd

=.pif

=.lnk

=.com

=.bat

F\ FTP

s.RPRP

tcPV

*9]0t#SSh

u.KKt*

~,SSSh

SSSSh

SSSh$6A~P

6SSSSh

t>SSh`

u"SSh`

ADVAPI32.dll

MSIMG32.dll

POWRPROF.dll

WINSTA.dll

RegCreateKeyExW

RegCloseKey

RegDeleteKeyW

ReportEventW

RegQueryInfoKeyW

ntdll.dll

GetViewportOrgEx

SetViewportOrgEx

GetViewportExtEx

GetCPInfo

GetSystemWindowsDirectoryW

NtQueryKey

NtEnumerateValueKey

NtYieldExecution

NtCreateKey

NtSetValueKey

NtDeleteValueKey

NtEnumerateKey

NtOpenKey

NtQueryValueKey

user32.pdb

windows.hlp

cOXY/P.Z0.0.QR00/ZPP0000000/0PPZR.BI@/DE0,

$$$006666

&$%Uooqkezs

['$$#%&(4

2

0 00@0[0

Summary

Dynamic Analysis

Removals

Static Analysis

Network Activity

Map

Strings from Dumps